CLEANING THE LID
Pour some warm water into the lid and add a few drops of washing up liquid.
•
Use a brush to remove all traces of food and rinse.
•
Then thoroughly wipe with a soft, dry cloth. Make sure the lid is completely dry before
•
placing it back on the jug.
You can also clean the seal. To do this, remove it, taking care not to damage it. Clean the
•
seal with a damp sponge and possibly a little non-abrasive detergent (washing up liquid, for
example). Once dry, return it to its original position.
CLEANING THE MOTOR UNIT
Clean any stains on the motor block with a clean, slightly damp cloth and dry it completely.
•
STORAGE
Wrap the power cord around the cord holder located under the motor unit and store the
•
appliance in a cool, dry place.
30
V.1.0
cleaning and maintenance