GYS TITAN 231 DC FV Manual De Instrucciones página 33

User manual
• Multi-Spot
This is a spot welding mode similar to TIG Spot, but with defined tacking and hold
times, as long as the trigger is held down.
• Tack
This welding mode also allows for the pre-assembly of workpieces before wel-
ding, but in two stages this time: the first phase is pulsed DC to concentrate the
arc for better penetration, followed by a second phase in standard DC to widen
the arc, and therefore the weld pool, to ensure the spot.
The adjustable times of the two phases allow for better repeatability and non-oxi-
dised points.
• Multi-Tack
This is a tacking mode similar to TIG Tack, but with defined spot and hold times
for as long as the trigger is held down.
Translation of the original
instructions
SETUP
PRESS 3''
The grayed-out areas are not available in this mode.
SETUP
PRESS 3''
The grayed-out areas are not available in this mode.
SETUP
PRESS 3''
The grayed-out areas are not available in this mode.
TITAN 231 DC FV
Weld
JOB
Weld
JOB
Weld
JOB
33