Control Panel Lock - clage DCX Next Instrucciones De Uso E Instalación

DCX Next / DCX 13 Next
7. Initial operation

Control panel lock

The control panel can be locked internally. The temperature is fixed at the last selected
value and the sensor button is deactivated.
EN
Activation of the locking function
1. Select hot water temperature
2. Disconnect the appliance from the power supply (e.g. by switching off the fuses).
3. Take the jumper off the power electronics and change to position "3" (see picture).
4. Put the appliance into operation again.
Deactivation of the locking function
1. Disconnect the appliance from the power supply (e.g. by switching off the fuses).
2. Take the jumper off the power electronics and change to position "OFF" (see pic-
ture).
3. Put the appliance into operation again.
Pos. OFF Pos. 3
32