auna Connect 100 MKII Manual De Instrucciones página 56

EN
56
Charge your device
You can charge your device through the USB socket on this unit with a USB
cable (not supplied).
Notes
• The maximum current for USB charging is 1 A.
• All devices for USB charging are not guaranteed.
• The USB charging is supported during power ON mode, it is not support
during STANDBY mode.
AUX IN MODE
Connecting a device with an auxiliary cable.
You can use an auxiliary cable to connect a device, such as an MP3 player.
To connect a device with an auxiliary cable:
1. Press HOME button, Turn and press the NAVIGATE dial to Select AUX IN.
2. Insert an auxiliary cable into the Aux in socket on the back.
3. Insert the other end of the auxiliary cable into the device you want to
connect.
AUX OUT
Audio-out socket (3.5-mm jack)
A 3.5-mm audio out socket located on the rear of your radio is provided for
connecting the audio signal to an external amplifier. Set the volume control
on the radio to minimum if desired.