Publicidad
Idiomas disponibles
Idiomas disponibles
4. How to use
Clean the appliance first according to the first time cleaning instruction in chapter 5.
Fill water tank until the water reaches the "MAX" mark; water will flow through the filter at a
set rate and it may take some time due to the action of the filter cartridge.
1. Plug in.
2. Place a mug or a glass on drip tray.
3. Select the desired temperature and volume (A-1).
4. Press the safety lock button to unlock the appliance (not applicable for ambient water) (A-2).
5. Press the dispense button to start dispensing (A-3).
A-1
Note
• The appliance will automatically go to sleep mode if there is no operation within 1 minute.
Touch the safety lock button to wake up the appliance.
• Please discard the water in the drip tray when it's full.
• There could be a temperature deviation of ±5℃. There could be a volume deviation of ±10%.
The actual temperature and volume depends on the using environment and local tap
water quality.
5. Clean and Maintenance
First time cleaning
1. Preparing the filter cartridge
• Remove the packaging. It is common that there is some powder on the surface of the cartridge.
These particles are harmless and can be washed off during the preparation process.
• Soak the filter cartridge in clean water for 15 minutes. Shake the filter cartridge in water
slightly to wash off the carbon powder on the surface.
A-2
05
A-3
Publicidad
