Philips ADD5910M Manual Del Usuario página 10

2. Preparing the appliance
• Remove the inner water tank.
• Ensure the seal ring is installed correctly.
• Press the �lter cartridge into the the inner water tank. Ensure it is �rmly secured (B-1).
• Reinsert the inner water tank into the water tank.
• Fill the water tank with 2L of cold tap water and re�t the water tank into the appliance.
• Place the drip tray and drip tray plate in front of the appliance (B-2).
• Place a jug or vessel under the dispense outlet.
• Plug in.
• Dispense ambient water till the water tank is empty.
• Discard the dispensed water. Your appliance is now ready to use.
Routine maintenance
• If the appliance is not used for more than 72 hours, we recommend cleaning it before use.
- Discard the water in the water tank. Rinse the tank.
- Re�ll the water tank with 1L of fresh tap water.
- Dispense ambient water till the water tank is empty.
- The appliance is ready to use.
• Wash, rinse and dry the inner water tank, water tank and the tank cover regularly, at least when
the �lter cartridge is replaced.
1
B-1
2
B-2
06