LORGAR LRG-GP510 Manual De Instrucciones página 9

You can set the gamepad vibration and backlighting of the A, B, X, Y ⑥ buttons to one
of 5 levels (see table 5 on page 6).
To change the vibration power by one level, press and hold Turbo ③, then press the
D-pad button ⑦ up to increase or down to decrease.
To change the backlight brightness by one level, press and hold the LB + RB ⑬ + R3
buttons and press the D-pad button ⑦ up to increase or down to decrease. Hold the
LB + RB ⑬ buttons for 5 seconds to turn off the backlight.
In Xinput mode, the gamepad buttons are automatically synchronized with the game
control. In Dinput mode, the gamepad buttons are set manually for each game.
Switching from Xinput to Dinput mode
When wirelessly connected, press and hold the Turbo button ③ to switch modes. For a
wired connection, press and hold the A + B buttons ⑥ and then press the Home
button ④. See table 6 on page 6 for indication of modes.
Gamepad does not turn on. Check the battery charge. Check that the USB cable is
working properly. Check that the charger is working properly. Check that the connectors
of the device to which the gamepad is connected for are working properly.
The gamepad does not respond to commands. Check the USB connection. Try
connecting the
PC/console/smartphone/tablet. Press the reset button ⑮ on the gamepad.
Disconnecting during the game.
 Install the latest operating system updates on your device.
 Press the reset button ⑮.
 Wired connection. If you are using a USB hub, make sure it is connected to a power
source. Connect the gamepad to a different USB connector.
 Wireless connection. Make sure the gamepad is connected to the correct device.
Check the USB connection of the BT transmitter ⑭. Check if BT is turned on. Check
the energy saving settings for BT and USB on the device the gamepad is connected to.
Inconsistency of the control buttons. Download updates from lorgar.eu. Switch your
gamepad to Dinput mode. Press the reset button ⑮.
The warranty period begins on the date of purchase from an authorized Lorgar retailer.
To obtain warranty service, provide your device and proof of payment to the dealer. The
warranty is 2 years, unless otherwise specified by local law. The service life is 2 years.
More information about use and warranty is available at lorgar.eu/warranty-terms.
Manufacturer: ASBISc Enterprises PLC, 1 Iapetou Street, Agios Athanasios,
4101 Limassol, Cyprus. Made in China.
The information is subject to change without notice to users. Up-to-date information and
a detailed description of the gamepad, its connection and operation steps, certificates,
and warranty conditions are available in the full user manual at lorgar.eu/drivers-and-
manuals. All trademarks and brand names are the property of their respective owners.
VIBRATION AND BACKLIGHTING
XINPUT AND DINPUT MODES
TROUBLESHOOTING
gamepad to a
WARRANTY SERVICE
FURTHER INFORMATION
different USB connector. Restart your
9