Mx Onda MX-HC2600 Manual De Instrucciones página 68

TIMER
Turning the timer control in the clockwise
direction, the
operation indicator lights up and the timer
will activate and start the countdown from
the set time. After the time an audible
indication and switch off the oven.
Note:
Anytime you can increase or decrease the timer, simply turn it to the left or
right to decrease or increase the time respectively.
Operation indicator and inner light
When the timer is counting down (has selected a time), the inner light and the
operation indicator will light up to warn that the oven is in operation. But if the
selector of the heating rods (SELECTOR), is in the OFF position, the heating
rods will not heat up.
TIPS
Before entering the food we recommend to preheat the oven.
Use containers suitable for ovens (resistant to high temperatures).
The time required for the cooking depends on the size and quality thereof.
Try not to open the oven door as little as possible, use the window of the
oven door to check the process. It will save time and energy.
The system convection distributes heat inside the furnace and the
temperature of food by accelerating the cooking process. Until you become
familiar with the system by convection, not neglect the process, it may
happen that the cooking time decreases.
You should also leave a space of at least 3 cm between the container and
the walls of the oven, to allow hot air flow.
The weight of food deposited on the grill or in the enamel tray should not
exceed approximately 2 kg.
Distribute food throughout the area of the grill tray or enamel to obtain a
uniform cooking.
If the parts are medium in size, half the process should turn them over and
get a homogeneous result.
ACCESSORIES
Depending on the food to cook, you must use the appropriate accessory:
oven will operate, the
8