Publicidad
5
DIRECTIONS TO USE - USE OF REMOTE CONTROL
5a. The Power Adapter (6) and the powered wire that emerges
from the back of the massager must be plugged in as
shown in the illustration. To operate the massager, plug
5b. Connect the Remote Control (5), and the wire that emerges
from the back of the massager.
5c. Turn the glider 'ON' by pressing the ON/OFF button on the
remote once. The LED will illuminate when the power is on.
5d. Turn on the massage in each zone by pressing the
Massage zone. LEDs will illuminate when each zone is
activated. To turn off a zone, press the button again.
5e. To choose a desired massage mode, press the MODE
button. To change modes, press the MODE button until
the LED for the desired mode illuminates.
5f. To change the massage intensity press the +/- button.
5g. NOTE: Discontinue use immediately if you feel any
discomfort or pain.
5h. NOTE: For your benefit, the massage chair is equipped
with an auto shut-off feature that will turn the chair unit off
after 15/30 minutes of continuous use.
5i. DO NOT use for more than 30 minutes of continuous use.
www.evolurbaby.com/help
Power
To Power Socket
6
5
13
Publicidad
