GE WNRD2050 Manual Del Propietário página 5

About the control settings.
1
CLOTHES CARE SELECTION
2
LOAD SIZE
A LOAD SIZE setting is automatically set when the CLOTHES CARE SELECTION is chosen. The LOAD SIZE setting
can be changed by pressing the pad for the size you want.
Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just cover the
clothes.
3
START/PAUSE
Press START to begin the cycle. Pressing START again or raising the lid will PAUSE the cycle.
■
Press twice to select the last cycle used and start the washer.
■
If the washer is running, press once to interrupt the cycle; press again to continue the cycle.
STOP/CANCEL
This pad should not be used to interrupt or pause a cycle.
Pressing this pad will cancel the current settings and the settings will be lost.
Estimated Time Remaining
■ Displays the approximate time remaining until the end of the cycle.
■ If the estimated time remaining is more than 60 minutes, "1H" will flash in the display, followed by the additional
remaining minutes. When the time remaining is less than 60 minutes, the timer will count down.
■ Cycle time is affected by how long it takes the washer to fill. This depends on the water pressure in your home.
The "smart" timer "learns" the amount of time it takes to fill your washer and adjusts the total time accordingly.
For heavily to lightly soiled cottons, household linens, work and play clothes.
For heavily to lightly soiled cottons, household linens, work and play clothes.
For non-colorfast cottons and blends, and items that are labeled cold wash by the fabric manufacturer.
For knits, wrinkle-free and permanent press items.
For lingerie and items labeled delicate with light soils. Provides periods of agitation and soak
during wash.
Spin and drain any cycle at any time.
5