Lenco PDR-065 Manual Del Usuario página 9

Digital audio broadcasting (DAB) radio
1. Turn on the unit by pressing On/Off button (3.), then press the Mode button (7.) to select DAB mode.
2. Unit will automatically scan all available stations in DAB mode.
3. Or press the Menu button (2.) once, the display will show < Full scan >. Press Enter button (8.) to confirm
and unit will start a full scan and all the received station will be kept in station list after scan.
4. Press Tune + / - (4) button to select your desired DAB channel then press Enter button (8.) to confirm the
selected channel.
5. Rotate volume up/down knob (5.) for the desired volume level.
6. Press the Info button continuously to check the below info released by DAB.
Signal strength→ program type→ Group name→ frequency → signal error→ transfer rate →time→date
Manual tune
1. Turn on the unit by pressing On/Off button (3.), then press the Mode button (7.) to select DAB mode.
2. Press the Menu button (2.) then press Tune - (4) button, the display will show < Manual tune >.
3. Press Enter button (8.) to confirm and the display will show the DAB channels.
4. Press press Tune + / - (4) button to cycle through the DAB channels and press Enter button (8.) to enter
the channel.
5. Rotate volume up/down knob (5.) for the desired volume level.
Display information
This is the feature which displays the information released from the radio broadcast and will showed on the
LCD display step by step as below by pressing the Info button (9.) continuously.
Radio text→ program type→ frequency→ mono/stereo → time → date
DRC (Dynamic Range Control) value
You can set the compression level of station to eliminate the different in dynamic range or sound level between
radio station.
1. Set in DAB mode. Press the Menu button (2.) then press Tune + / - (4) button to select < DRC >. Press Enter
button (8.) to enter the setting.
2. Press the Tune + / - (4) button to select your desired DRC level then press Enter button (8.) to confirm your
selection.
Station order
1. Set in DAB mode. Press the Menu button (2.) then press Tune + / - (4) button to select < Station order >.
Press Enter button (8.) to enter the setting.
2. Press Tune + / - (4) button to browse 'Alphanumeric' and 'Ensemble' then press Press Enter button (8.) to
confirm your selection.
Prune inactive station
1. Set in DAB mode. Press the Menu button (2.) then press Tune + / - (4) button button to select < Prune >.
Press Enter button (8.) to enter the setting.
2. Press S Tune + / - (4) button to select 'Yes' then press Press Enter button (8.) to confirm.
Preset memory station
You can store 10 DAB stations in the memory and the setting step were exactly same as FM.
9