Electrical connection
The electrical connections must be made according to the following
instructions in order to ensure safe and error-free operation:
GB
■ Before you connect the device, compare the connection data for
■ Keep the cable away from hot surfaces and sharp edges.
■ Make sure not to bend the cable or pull it too tightly.
Installation and connections
For continuous playback, the device can be placed on a fl at surface.
Insert the stand into the device.
CAUTION
The device can be damaged if it tips over or falls down.
► Make sure that the device cannot tip over.
Connect the connection cable to the socket on the device and
► Only use the enclosed power supply adapter.
34
the power supply adapter (voltage and frequency) on the type pla-
te with that of your mains power supply. This data must match to
avoid damage to the device.
plug in the power supply adapter.
NOTE