FanJu FJ3362G Manual página 13

: The temperature/humidity is remaining constant.
Maximum/Minimum Temperature/Relative Humidity
► To toggle indoor/outdoor maximum, minimum temperature and humidity data, touch the "▼" location:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
►To reset the maximum and minimum temperature and humidity, touch and hold down the "▼" more than 2 seconds.
Outdoor Temperature Alert Setting
► Touch and hold down the "
upper limit alert setting of the outdoor temperature. Now touch the "▲" and "▼" locations to set the upper limit alert
value
► Touch the " " button to confirm your setting, switch to the lower limit alert value of outdoor temperature. Now touch
the "▲" and "▼" locations to set the upper limit alert value
► Touch the " " button to confirm your setting and to end the setting procedure.
► When setting the upper and lower limit alerts for outdoor temperature, touch the "
settings for setting the upper and lower outdoor temperature limits of different channels.
Temperature Alert
► Touch the " " once to turn ON or OFF the temperature alert function. After the temperature alert is turned ON, the
alarm icon " " will be displayed in the ALERTS box, indicating that the temperature alarm has been turned ON.
► The outdoor temperature alert is independent for each channel, you need to set the corresponding channel, you
need to touch the "
on or off the temperature alert
► When the temperature exceeds the set temperature range, an alarm will be activated and the weather station will
emit three beeps continuously. At the same time, the temperature alarm in the alarm icon "
temperature value and the alarm upper limit icon "
the temperature alarm is triggered after the temperature is updated, the weather station will issue a BI sound prompt.
► In this alert mode, press any button to stop the alarm sound, and the warning is still displayed.
Temperature Frost Warning
► When the temperature of outdoor sensor is –1°C (+30°F) to + 3°C (+ 37°F), the frost alarm will be activated, the
frost alert icon "
Comfort and Mildew Risk Instructions
► Indoor comfort level is calculated according to the indoor temperature and humidity, a total of 5 levels.
FJ3362G Manual
" for more than 2 seconds to enter the outdoor temperature alert setting. The first is the
" to convert to the channel number to be displayed, and then Touch the " " location to turn
" flashing.
" or the lower limit icon "
" location to switch the alert
" flashes, and its
" also flash. In addition, every time