Mc Haus ARTIC-10 Manual De Instrucciones página 48

PLACE OF ASSEMBLY
Mount in a flat, dry place, leaving 50cm free around the appliance
to allow regular air circulation, as shown in Fig. 1 (before connecting
the exhaust pipe).
EXHAUST PIPE ASSEMBLY
• Connect the exhaust pipe with the round gasket (Fig. 2).
• Attach the round end of the exhaust connection to the air
conditioning outlet as shown in Fig. 3.
• Connect the flat gasket of the exhaust pipe connection to
the window seal plate.
• Install the seal plate to the nearest window. Obstacles
should not be allowed at a distance of 50 cm around the
window to ensure unobstructed exhaust air output.
WARNING: The exhaust pipe is 60cm-170cm
long (including the adapter). We recommend
using the minimum length to save energy.
The length of the exhaust pipe is specially
designed according to the air conditioning
specifications. Please do not use other exhaust
pipes of different lengths or materials, as this may
cause a breakdown.
MOUNTING THE WINDOW SEAL PLATE
The window seal plate design fits with most horizontal or vertical
windows. The assembly procedures are shown below:
1. Measure the size of the window;
2. Adjust the length of the window seal plate to match the
size of the window;
3. After adjusting the window seal plate, tighten with screws
(Fig. 4)
4. Place the fixed window seal plate in the window (Fig. 5 and
Fig. 6)
5. Insert the exhaust pipe into the window seal plate, tighten
with screws (Fig. 7 and Fig. 8).
ASSEMBLY
1
2
3
4
ARTIC-10