Mc Haus ARTIC-10 Manual De Instrucciones página 53

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ATTENTION! If the WATERFULL signal appears, the device will stop working, it should drain
the water in time. After draining, the appliance will start automatically.
In DEHUMIDIFY and FAN modes, you do not need to use the exhaust pipe.
If your room receives direct sunlight, please place the curtains.
DRAIN OPERATION
When the appliance is operating in COOL or DEHUMIDIFY mode in a humid climate, more condensation
occurs. The waterfull alarm is activated when the water level rises and the machine stops working. The
waterfull signal will illuminate on the display and an audible alarm will be emitted simultaneously 10 times
for 5 minutes until the water tank level is lower or the water tank is drained manually. When the alarm is
deactivated, the air conditioning automatically resumes operation.
When the air conditioner emits the waterfull alarm, please drain the water in time. You can move the air
conditioner to where you want to drain the water directly (the bathroom or a sewer). Unscrew the nut and
remove the plug to drain all the water. Replace drain plug and nut before use.
CAUTION: When the water tank is full, please move the air conditioning firmly, otherwise the
water may overflow from the inside.
Drain plug
ARTIC-10
EN
Nut

Publicidad

Tabla de contenido
loading

Tabla de contenido