Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ASSEMBLY, MAINTENANCE, &
USER MANUAL
MODEL #STRC915.2
WARNING
Read all precautions and instructions in
this manual before using this equipment.
Skywalker Holdings LLC
Save this manual for future reference.
P.O. Box 574, Brigham City, UT 84302
Maximum user weight 250 lbs.
Publicidad
Manuales relacionados para Skywalker Trampolines STRC915.2
Resumen de contenidos para Skywalker Trampolines STRC915.2
- Página 1 ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #STRC915.2 WARNING Read all precautions and instructions in this manual before using this equipment. Skywalker Holdings LLC Save this manual for future reference. P.O. Box 574, Brigham City, UT 84302 Maximum user weight 250 lbs.
- Página 2 HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY Skywalker Trampolines belongs to a family of brands focused on providing active products. Check us out online! We've got assembly videos (for those of you who prefer movies over books), FAQs (so you know you're not the only one who had a question), additional products (including fitness, sports and playground equipment), and most importantly, find us on social media! Because we want to be your friend.
- Página 3 BEFORE YOU BEGIN Thank you for choosing Skywalker Trampolines! We’re just as excited as you are to help your family live an active (but most importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it, too. We want to make things easier for you, so we have listed all the important information that you (and your little outdoor adventurers) need to know.
- Página 4 PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly. Corner Tube (x4) Straight Tube (x4) Socket (x8) Male Leg (x4)
- Página 5 Self-tapping Screw Straight Tube (x8) Curved Tube (x8) (x10) (2 Spare Parts) M10x80mm Bolt (x16) M10 Nut (x16) M10 Washer (x16) M6x70mm Bolt (x20) M6 Washer (x40) M6 Nut (x20) Foam (x16) Pole cap (x8) End Cap (x8)
- Página 6 PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly. M5x44mm Bolt (x8) Spring Tool (x1) Wrench (x2)
- Página 7 EXPLODED DRAWING (23) (25) (14) (22) (15) (13) (12) (10) (11) (17) (16) (18) (16) (24) (20) (19) (24) (20) (21) (20) (19) (20) (21) (19) (20) (20) (19) (20) (20) (21)
- Página 8 ASSEMBLY READ THIS BEFORE YOU BEGIN • You’ll probably need at least two adults and 2 hours to assemble your trampoline (of course, that depends on what model you have, and whether or not you’re secretly a superhero) • We’ve provided some tools to help with assembly, but you’re more than welcome to use your own. •...
- Página 9 ASSEMBLY STEP 3 Then, secure using four M10x80mm bolts (16), four M10 washers (17), and four M10 nuts (18). Repeat steps 2-3 to assemble one additional frame section. M10x80mm M10 Washer M10 Nut (x4) Bolt (x4) (x4) (18) (17) (18) (17) (18) (17)
- Página 10 ASSEMBLY STEP 5 Then, secure using four M10x80mm bolts (16), four M10 washers (17), and four M10 nuts (18). Repeat steps 4-5 to assemble one additional frame section. You will now have four corner frame sections. M10x80mm M10 Washer M10 Nut (x4) Bolt (x4) (x4) (18)
- Página 11 STEP 7 Insert all eight leg posts (4) into the sockets of the frame sections you assembled in steps 2-5. Then insert the assembled U-shaped leg sections into the leg posts. Leg Post (x8) Step 5 Step 3 STEP 8 Secure everything in place using eight M6x70mm bolts (19), 16 M6 washers (20), and eight M6 nuts (21).
- Página 12 ASSEMBLY STEP 9 Grab a friend and flip the assembled corner leg sections over so they are now standing on the legs. (Do not skip this step! We’re not underestimating your strength or anything, but if you connect before flipping, the entire frame will be too heavy to flip.) Now place a middle frame tube (7) (bend facing out) in between two corner leg sections and slide them together.
- Página 13 STEP 11 The enclosure net (9) will be pre-installed to the jump mat (8). Before continuing, make sure each V-ring of the jump mat is properly threaded through the corresponding hole in the enclosure net. Enclosure Net (x1) Jump Mat (x1) Warning label Enclosure door Warning label...
- Página 14 ASSEMBLY STEP 13 You may want to use gloves for this step! Using the spring tool (26), hook the smaller end of a spring (10) into the V-Ring that’s just left of a corner D-ring. Stretch the free end of the spring until it reaches the nearest frame hole on the corner tube (1).
- Página 15 STEP 15 Now, hook two smaller springs (10) into a D-Ring on the corner of the jump mat. Stretch the free ends of the springs until they reach the nearest frame holes on the corner tube (1). Repeat this step to attach two springs on each of the four corner D-rings.
- Página 16 ASSEMBLY STEP 17 Now, working in a clockwise direction, attach all of the remaining smaller springs. Make sure the V-rings and frame holes line up correctly. (Remember, you’re the boss here. You tell those springs what to do! And other people if they’re helping...) Spring (x28) STEP 18 Lay the two frame pad (12) pieces on the frame.
- Página 17 STEP 19 Look under the trampoline. Find the straps that are attached to the underside of the frame pad (12). Position the outer straps so that one strap is on each side of the frame. Position the inner straps so that one strap is threaded through a V-ring.
- Página 18 ASSEMBLY STEP 21 Important: The pole cap (23) has two sides; one with a hexagon hole, and one with a round hole. Insert the pole cap into one strap ring found on the top of the enclosure net. Make sure the hexagon hole is facing the net, and the round hole is facing you.
- Página 19 STEP 23 Starting from the enclosure door, lift one of the assembled poles and insert the straight tube (13) into the socket. Repeat this process to insert the seven remaining poles. Helpful tip: When inserting the enclosure poles, pull back on the middle of the poles! Pull back Socket STEP 24...
- Página 20 ASSEMBLY STEP 25 LAST STEP YOU’RE IN THE FINAL HOME STRETCH. Using the included plastic tie, attach the safety placard to the trampoline frame close to the enclosure door. Safety placard STEP 26 Congratulations on completing your new trampoline! (See, we knew you could do it!) So here comes the real question...
- Página 21 MAINTENANCE & CARE INFORMATION Congratulations and high five on successfully assembling your new Skywalker Trampolines Trampoline with Enclosure! Now, the best way to keep your new trampoline in tip top shape, is to periodically check for: • Missing, improperly positioned, or insecurely attached frame padding, netting, enclosure tubes, or foam sleeves •...
- Página 22 WARNING INSTRUCTIONS FOR USE To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use the trampoline and enclosure. Warnings and instructions for care, maintenance, and use of this trampoline and enclosure are included to promote safe enjoyable use of this equipment.
- Página 23 Do not use the trampoline as a springboard to other objects. Do not jump from other objects, buildings, or surfaces, onto the trampoline, or into or over the trampoline enclosure. For further equipment information contact Skywalker Trampolines. For skill training information, contact a trainer certification organization.
- Página 24 INSTRUCTIONS & MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervision and the student(s). 1. Fundamental bounce: Demonstration and practice. 2. Knee Drop: Demonstration and practice. 3.
- Página 25 Lesson 5: Seat Drop Lesson 6: Front Drop 1. Land in a sitting position with your legs parallel to the 1. Start from a low bounce and land on the mat in a mat. prone position. 2. Place your hands on the mat beside your hips. 2.
- Página 26 Lesson 9: Mounting and Dismounting Lesson 10: Breaking 1. Users should climb onto the trampoline by placing 1. Starting from a standing position, jump into the their hands on the frame and stepping or rolling up air. onto the frame, across the springs and onto the mat. 2.
- Página 27 TRAMPOLINE SAFETY INFORMATION In trampoline use, as in all active recreational sports, participants can be injured. However, there are steps that can be taken to reduce risk of injury. In this section, primary accident patterns are identified and the responsibilities of supervisors and jumpers in accident prevention are described.
- Página 28 ENCLOSURE SAFETY INFORMATION NEED FOR TRAMPOLINE ENCLOSURE SAFETY A trampoline enclosure is a recreational product. The information on this page identifies important safety precautions. The precautions are not all-inclusive, because an enclosure can be used in ways that this manual cannot cover completely.
- Página 29 METHODS OF ACCIDENT PREVENTION THE SUPERVISOR’S ROLE IN PREVENTING ACCIDENTS It is the responsibility of the supervisors of trampoline users to provide knowledgeable and mature supervision. They need to know and enforce all of the rules and warnings printed in this manual to minimize the likelihood of accidents and injuries.
- Página 30 WORN, DAMAGED OR BROKEN PARTS SHOULD BE REPLACED IMMEDIATELY AND BEFORE USE. Call the Skywalker Trampolines Customer Service Department at 1-866-603-5867 to file a warranty claim. Be prepared to provide the following information: name, shipping address, a copy of your original sales receipt, a brief description of the problem and cause, trampoline model number and serial number.
- Página 31 NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES.
- Página 32 MONTAJE, MANTENIMIENTO Y MANUAL DEL USUARIO MODELO N.º STRC915.2 ADVERTENCIA Lea todas las precauciones e instrucciones de este manual antes de utilizar este producto. Skywalker Holdings LLC Guarde este manual para consultarlo en el P.O. Box 574, Brigham City, UT 84302...
- Página 48 ASSEMBLAGE, ENTRETIEN ET MANUEL DE L’UTILISATEUR DE MODÈLE STRC915.2 AVERTISSEMENT Veuillez lire toutes les précautions et les instructions de ce manuel avant d’utiliser cet équipement. Skywalker Holdings LLC Conservez ce manuel pour référence ultérieure. P.O. Box 574 Brigham City, UT 84302...