Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Do not allow children to climb or play in or around this product.
• Use this unit for its intended purpose only. Do not use shelves as step ladder.
• To avoid damage, assemble the product on a sturdy, level and protective surface.
• Two or more persons must work together to install the unit onto the wall.
• Make sure all bolts/screws are tightly fastened before the unit is used.
• Check bolts/screws periodically and tighten them if necessary.
• Each shelf maximum load: 30 lbs.
SHELF MAXIMUM:
13.6kg / 30 lb
HOOK MAXIMUM:
1.1kg / 2.5 lb
EVENLY DISTRIBUTED.
ENTIRE UNIT MAXIMUM
WEIGHT CAPACITY:
31.7 kg / 70 lb
EVENLY DISTRIBUTED
WARNING
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN IN-
STABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, Level, Power Drill, 3/16 in. Drill Bit,
3/8 in. Drill Bit, 1/2 in. Socket Wrench, Stud Finder, Marking Pencil, Tape Measure, Step Ladder, and
Hammer.
5
ASSEMBLY INSTRUCTIONS
1. Insert cam bolts (BB) into upper left back post (D), up-
per left front post (E), upper right back post (F), upper right
front post (G), attach left side rail (B), right side rail (C),
tighten with cam lock (AA).
Hardware Used
AA
Cam Lock
Cam Bolt
BB
2. Insert wood dowel (CC) into upper left back post (D),
upper right back post (F). Attach upper back panel (H), and
upper left front post (E), upper right front post (G), front rail
(I), tighten with cam lock (AA).
Hardware Used
Cam Lock
AA
CC
Wood Dowel
3. Insert cam bolts (BB) into upper shelf panel (A), middle
shelf panel (J).
Hardware Used
Cam Bolt
BB
1
BB
F
AA
x 4
x 10
D
B
E
2
D
E
H
I
x 2
x 2
3
BB
J
x 11
6
C
G
CC
F
G
AA
A
Publicidad
