Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning and maintenance
WARNING!
• Always unplug the unit from the mains socket before
cleaning it.
• Never immerse the unit, power cable or plug in water
or any other liquid, to avoid any electrical hazard. Never
rinse them under a tap.
NOTE: Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the unit.
• General cleaning – Wipe the main unit and base with a soft
cloth/sponge lightly soaked in water or a small amount of soapy
water to remove any dirt and dust. After cleaning, dry the unit
thoroughly.
• Deep cleaning – To remove the dust that has accumulated on
the grills and propeller, follow these steps:
• Disassemble the fan head by following the steps indicated in the
"Assembling the grills and propeller" section in reverse order.
– Wipe the motor unit with a soft cloth slightly dampened with
water or a small amount of soapy water. Dry well.
– Clean the front and rear grills, propeller, plastic propeller
cap and rear grill nut in slightly soapy water with a soft cloth/
sponge. Rinse thoroughly and dry with a soft cloth. Allow all
elements to dry thoroughly before reassembling them on the
motor unit.
24
EN
Publicidad
