Publicidad
Idiomas disponibles
Idiomas disponibles
10.
Chime characteristics
• Sensitivity: -112 dbm
• Frequency: 433 MHz
• Power consumption in standby mode: 10 mW
• Volume: 5 levels (maximum: 100 dB / minimum: mute)
11.
Installation and setup of the chime
1. Connect the chime to the power supply.
2. Select the melody: this chime has 50 melodies.
3. When the chime is connected, press the "Melody selection" button
repeatedly until you find the tone of your preference.
4. Press the "Volume Select" button to choose the desired level of
modulation.
5. To link the chime to the video doorbell, press and hold the Volume
selection button for 5 seconds until the LED indicator lights up, then
press the "Call button" on the video doorbell to synchronize.
6. Under the same procedure, you can link the chime to another video
doorbell and/or you can pair two or more video doo bells to the same chime.
7. If you want the chime to play a different melody for each video doorbell,
be sure to select the desired tone in the chime before performing the
linking process.
8. To unlink the chime from the video doorbell, disconnect it from the
power supply. Before switching it back on, press and hold the Volume
selection button and do not release it for 5 to 10 seconds even after
switching it on. When theindicator LED lights up, the device will reset
to its factory settings.
NOTE:
• It is recommended to link the chime before setting up your video
doorbell in the app.
• The name that you assign to the device will be the one that you use
for voice commands with Google and Amazon Alexa assistants.
21
Publicidad
