Emos H4010 Manual De Instrucciones página 7

7g
GB | IP Video Door Phone Set
Package contents:
Indoor monitor
Monitor mount
Camera unit
Power supply
Mounting material – screws
Manual
Technical specifications:
Screen: 7"
Resolution: 1080p/960p/720p/480p
Video formats: AHD/CVI/TVI/CVBS
Lens angle: 160°
Storage: SD card (max. 128 Gb), Cloud storage
Enclosure rating: IP55
Maximum number of users: 10
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
Description of the device: fig. 1a
1 – Microphone
2 – TFT-LCD screen
Description of the device: fig. 1b
3 – SD card slot
Description of the device: fig. 1c
4 – Speaker
5 – Anchor points
6 – Gate control
7 – Power supply
8 – Door unit – door 1
9 – External CCTV camera 1
10 – Input from the preceding monitor
11 – Door unit – door 2
7h
12 – External CCTV camera 2
13 – Output for another monitor
Description of the device: fig. 1d
1 – Microphone
2 – Lens
3 – IR illumination
4 – Speaker
5 – Ring button
Description of the device: fig. 1e
1 – Video mode selection button
• Hold the button for 5 s to switch modes
2 – Button for setting the duration (1–10 s) for controlling
the door lock
3 – Volume setting for the camera unit's speaker
Installing the indoor monitor: fig. 2a
1. Place the mount onto the chosen installation spot.
2. Drill holes to install the mount onto the wall.
Gently press the monitor to the frame so that the protrusions
lock into the opening at the rear of the monitor. Pushing the
monitor slightly downwards will fix it in place.
Installing the camera unit: fig. 2b/2c
1. Choose a suitable mounting spot and attach the mount-
ing frame.
2. Pull the power supply cable through the mounting
opening and connect it to the terminal at the rear of the
door camera unit.
3. Mount the connected door camera unit onto the mounting
frame using the enclosed screws.
4. Apply a layer of silicone between the wall and the door
camera unit to prevent ingress of humidity under the door
camera unit. The silicone should be applied on the top
and the sides. The bottom side must be left open to allow
humid air to exit the space under the door camera unit.
7