Emos H4011 Manual De Instrucciones página 4

GB | Video Door Phone
Package contents:
Indoor monitor
Power supply
Mounting material – screws
Manual
Technical specifications:
Screen: 7"
Resolution: 1080p/960p/720p/480p
Video formats: AHD/CVI/TVI/CVBS
Storage: SD card (max. 128 Gb), Cloud storage
Description of the device: fig. 1a
1 – Microphone
2 – TFT-LCD screen
Description of the device: fig. 1b
3 – SD card slot
Description of the device: fig. 1c
4 – Speaker
5 – Anchor points
6 – Gate control
7 – Power supply
8 – Door unit – door 1
9 – External CCTV camera 1
10 – Input from the preceding monitor
11 – Door unit – door 2
12 – External CCTV camera 2
13 – Output for another monitor
Installing the indoor monitor: fig. 2
1. Place the mount onto the chosen installation spot.
2. Drill holes to install the mount onto the wall.
Gently press the monitor to the frame so that the protrusions
lock into the opening at the rear of the monitor. Pushing the
monitor slightly downwards will fix it in place.
Connecting the system: fig. 3
For distances under 50 m, we recommend a quality FTP
CAT.5 cable (optimally CAT.6).
Main Screen
At Home mode – normal functioning, sending of
notifications
Away mode – after ringing, the visitor is automatically
asked to leave a message
Do Not Disturb – both indoor and outdoor unit won't ring,
only send notifications to a mobile device
Number of doorbell rings – visits
Alarm
Device Menu
The Settings option contains:
• System settings of the device
• Time/date settings
• Network settings
The Ringtone option contains:
• Setting of up to 3 ringtones for the Entrance 1 input
• Setting of up to 3 ringtones for the Entrance 2 input
The Answering Machine option contains:
1. Call records – photos/video recordings captured auto-
matically after the pressing of the button on the door
camera unit
2. Voice mail – voice messages recorded by the camera
unit during the owner's absence
3. Motion detection – photos/video recordings captured
automatically while the motion detection function was
active
4. Alarm – Number of triggered alarms – detection
The Entrance 1 option contains:
• Current view from the door camera unit connected to
the Entrance 1 input
The Entrance 2 option contains:
• Current view from the door camera unit connected to
the Entrance 2 input
The Camera 1 option contains:
• Current view from the external camera unit connected
to the Camera 1 input
The Camera 2 option contains:
• Current view from the external camera unit connected
to the Camera 2 input
The Multimedia option contains:
• Overview of films/videos stored on the Micro SD card
• Overview of music stored on the Micro SD card
• Overview of photos stored on the Micro SD card
The Intercom option contains:
• Function enabling communication between individual
monitors within the same communication branch
• In order for intercom communication to function cor-
rectly, each monitor within the communication branch
must have its ID set
The Locked/Unlocked option contains:
• Controls of gate travel directly from the touch screen
of the indoor monitor
Description of the Icons on the Call Screen
Zoom out
Settings – volume, brightness, contrast, saturation
Zoom in
Switch – Entrance 1, Entrance 2, Camera 1, Camera 2
Take a photo
Make a video recording
Entrance 1/Entrance 2 – unlocked/locked
Gate control
Accept/End call
4