Publicidad
Idiomas disponibles
Idiomas disponibles
Original
User Manual
Maintenance and care
6
Regular care and maintenance extend the service life of the VarioTwin type sump.
If damage should appear to the sump and/or grid, this must be repaired immediately.
Damage to the upper surface of the sump should be repaired immediately by the user, so that corrosion
does not occur. When replacing the grid ensure the replacement has the same load capacity and dimen-
sions as the original.
When cleaning the sump, the grids and support brackets must be removed. After cleaning, all support
brackets and grids should be refitted in accordance with section 3.3 Fitting the grids.
Keep the sump dry and free from contamination.
Check the sump weekly for leaked fluids, and check underneath too.
Safely dispose of leaked fluids immediately.
Use only original spare parts from the manufacturer
Disposal
7
Clean the sump thoroughly before disposal to remove any hazardous material residue.
The sump is made from mainly metal and plastic parts. When the sump is to be decommissioned, any
waste materials must be disposed of in accordance with regional and legal requirements.
217882_BA_VarioTwin_001_INT
NOTE
NOTE
Page 14 of 28
25.06.13
Publicidad
