Descargar Imprimir esta página

Osram FLUENCE RAZR Modular GLOBAL Guia De Instalacion página 6

Publicidad

1. CAUTIONS AND WARNINGS
1.3. IMPORTANT SAFETY PRECAUTIONS & EXPLANATION
OF SYMBOLS
Please read this manual thoroughly before attempting to install or
operate any Fluence RAZR Modular Series system.
After successful installation and configuration of the system, be sure
to retain this manual in a safe place for future reference. Safety is a
key component to a long lasting and trouble free installation.
It is important you read, fully understand, and observe the subsequent
safety precautions. If you are not comfortable with the installation of
high performance lighting systems, you should seek the services of a
qualified installation professional or call us for help.
NOTICE: RAZR Modular is a high-performance lighting system.
DO NOT TOUCH
while in operation.
Connect the system only to the power sources of the appropriate
voltage using the correct AC plug type. Protect power cables from
being pinched, walked on, or otherwise damaged. Be especially
careful where the power cable enters the power outlet and the unit.
Only connect the system to an electrical outlet or extension cord of
appropriate type and rating. Connect the system only to the power
sources of the correct voltage using the plug received.
DO NOT defeat the safety purpose of a grounding or polarized plug by
removing ground pins or using unsafe adapters. A polarized plug has
two blades – one wider than the other. A grounding plug has a third
ground prong in addition to the two main conductors. The wide blade
or third grounding prong is provided for your safety. If the provided plug
does not fit your outlet, consult an electrician to replace your obsolete
outlet. If you replace the power cord, only use one of similar type and
equal or greater current rating.
The system should only be cleaned as directed in the manual. You
should seek service for your system by qualified service personnel if
any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. The unit has been exposed to rain.
3. The unit exhibits a marked change in performance.
4. The unit has been dropped, or its enclosure or chassis is damaged.
1.4. CULTIVATION BEST PRACTICES
Fluence encourages everyone to experiment and pursue their own
techniques. Every crop is different and everyone has different goals.
For cultivation recommendations visit
https://fluence.science/science-articles/
6
1.5. GENERAL CARE
RAZR Modular lighting systems are passively cooled with zero moving
components. They are designed for harsh environments and years of
reliable performance. Some basic care will keep your system operating at
peak performance cycle-after-cycle.
For detailed instructions for maintenance and cleaning, refer to
the Fluence Light Fixture Cleaning Recommendations,
available at www.fluence.science/support-center/
Maximum Ambient Operating Temperature: 104° F / 40° C*
*Note: 95° F / 35° C when operated at 120 V AC supply voltage.
Maximum Ambient Humidity: 90%, Non-Condensing
SYSTEM SPECIFICATION SHEETS
For complete product information and system specifications please visit
www.fluence.science/support-center/
or email
support@fluence-led.com
RAZR Modular is a high-performance lighting
system. Do not touch while in operation.
PLEASE RECYCLE ALL PACKAGING MATERIAL.

Publicidad

loading