Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth Playback
•
Slide the FUNCTION switch to the CD / AUX / USB / Bluetooth position.
The display will light up.
•
Hold down
longer to switch from CD to USB, and then to Bluetooth.
•
Enable Bluetooth on the device you want to connect, search for the
device named ROADIE, and connect to it.
•
If you are prompted for a password, type "0000" (zero, four times).
•
The Bluetooth LED lights up as soon as the connection has been
established successfully.
•
Play the music on the connected device. Music playback is controlled
through your connected device. You can adjust the volume using the
connected device, or using the volume control of the ROADIE.
•
Hold down the STOP / PAIR button for three seconds to break the
existing connection and enter pairing mode (to connect another
Bluetooth device)
Please note: Your Bluetooth device (player) must have the Bluetooth profile
A2DP to enable music to be played using Bluetooth.
AUX input
For other devices, you can use the AUX input. Use a 3.5mm audio cable
for the connection. Slide the FUNCTION switch to the CD / AUX / USB /
Bluetooth position to switch to the AUX function. All playback is controlled
by the external device.
Light effects
Turn the LED light on or off with LIGHT. The LED effects are music-
controlled. When no music is playing, the effects remain turned off.
EN
13
Publicidad
