Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Working speed ................ 35 m/s
Rotational speed ...........4750 rpm
Sound pressure level
(L
) ........... 67.7 dB(A); K
pA
Sound power level
(L
) ......... 80.7 dB(A); K
WA
Levels of noise and vibration were
determined according to the stan-
dards and regulations in the decla-
ration of conformity.
The specifi ed total vibration value
and the stated noise emission value
have been measured according to
a standardised test method and can
be used to compare one power tool
with another.
The specifi ed total vibration value
and the stated specifi ed noise emis-
sion value can also be used for a
provisional assessment of the load.
The vibration and noise
emissions may deviate from
the specifi ed values during actual
use of the power tool, depending
on how the power tool is being
used and, in particular, what kind
of material is being worked on.
-Safety measures for the protection
of the operator are to be determi-
ned that are based on an estimate
of the actual vibration load under
the real operating conditions (for
this, all parts of the operating cycle
56
are to be taken into account, for
example, times in which the power
tool is turned off, and those during
= 3 dB
which it is turned on but running
pA
without a load).
= 3 dB
WA
Safety information
Graphical symbols
Symbols on the device:
Symbols used in the
instruction manual:
Caution!
Read the instruction manual
Wear eye protection
Wear ear protection
Protection class II
(Double insulation)
Electrical devices must not
be disposed of with dome-
stic waste.
Hazard symbol with infor-
mation on the prevention
of personal injury or pro-
perty damage.
Publicidad
