Publicidad
Idiomas disponibles
Idiomas disponibles
Basic operation
Turn the camera on and off
Switch the Mode switch to "Test/On" to turn on the camera.
After power on, it will pop up the battery type selection interface:
1.5V alkaline battery/3.7V lithium battery, press the up and
down keys to select the corresponding battery, press the OK
button to confirm.
Switch the Mode switch to "Off" to turn off the camera.
System setup
Switch Mode switch to "Test", then you can set the system
parameters.
1. Press Menu button to open the setup menu.
2. Press Up/Down button to navigate through all menu. Then
press OK button to enter the options interface.
3. Press Up/Down button to navigate through all options. Press
OK button to confirm options.
4. Press Menu button again to turn back to last menu or exit the
setup menu.
5
Publicidad
