Publicidad
Idiomas disponibles
Idiomas disponibles
• Attention: The heating element surface is subject to residual heat after use.
• The mains cable must not come into contact with any hot parts of the appliance.
• This appliance is intended for domestic use only. The manufacturer cannot accept
any liability for possible damage caused by improper or incorrect use.
• Attention: If the kettle is overfilled there is a risk that the boiling water may spray out,
which could scald or burn! Therefore never fill the kettle above the maximum marking.
• Never operate appliance with open lid.
• Only use the kettle for heating water!
• The kettle can only be used with the stand provided.
• The mains cable or anything else must do not touch the power switch. Failure to do so
could result in the auto shut off function not to work correctly and therefore in a risk
of overheating or fire.
• While water boiling, avoid contacting with steam from the spout when water is boiling
or just after it has switched off. Do not be anxious to uncover the lid.
This appliances is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
The surface with symbol
GETTING STARTED (Picture page 2-3)
1
Before first use, wipe the inside and outside of the kettle with a damp cloth.
2
Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket. Redundant cord can be wound into the
bottom of base unit.
3
Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level indicator, but
not exceeding the Max. mark. Fill at least 0,5 L water to ensure that the temperature shown on the display is reliable.
Recommended temperatures:
40-60 °C for baby mixtures
80 °C for delicate teas (green/white)
90 °C for instant coffee or soup
100 °C for perfect black tea
4
Close the lid and make sure it snaps in correctly. Place the kettle onto the base. The display shows the water temperature.
After 5 minutes without operation, the display turns off/black.
5
When the display is off/black, press any button and turn on the display, which shows the water temperature.
6
Press the START button and start heat the water to 100˚C. The display shows 100˚C and after 3 seconds it shows the real
time water temperature.
7
To heat water to selected temperature (not boiling): Press the buttons
button to start heating the water. After 3 seconds, the display will turn from selected temperature to the real time water
temperature.
8
When the water boils or the selected temperature is reached, the kettle beeps 2 times and switches off automatically.
9
Press the KEEP WARM/TURBO button and start to keep it warm at 95 ˚C for 40 minutes.
10
To heat water to selected temperature and keep it warm at the selected temperature: Press the buttons
select temperature and then press the KEEP WARM/TURBO button.
11
When the selected temperature is reached, the kettle beeps 2 times and keeps the water warm at the selected temperature
for 40 minutes.
12
To boil only 1 cup of water, fill the kettle with 1 cup of water (approx. 200ml), and long press KEEP WARM/TURBO button for
3 seconds. When the water boils, the kettle beeps 2 times and switches off automatically.
14
K5-1-6ST_WaterKettle_AEG_202206_all lang rev 2.indd 14
K5-1-6ST_WaterKettle_AEG_202206_all lang rev 2.indd 14
: Caution, hot surface are liable to get hot during use.
or
to select temperature. Press the START
www.aeg.com
or
to
2022-06-09 16:31:34
2022-06-09 16:31:34
Publicidad
