Anker 651 USB-C Dock Manual Del Usuario página 5

If you're using a Windows laptop to connect dual monitors, you can choose between
showing the same content or different content on both monitors.
Specifications
Data Transfer Speed
DC-IN Input
Dock
Power Delivery
Charging Power
Operating Temperature
Wireless
Charging Radiated H-Field
Stand
TX/RX Frequency Range 111-205KHz (for EU / UK only)
Trademarks
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
• You cannot charge your device wirelessly in these scenarios:
・using a case with a magnetic/iron plate;
・using a case with a grip or stand;
・using an ultra-thick (> 5 mm) protective phone case.
• Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery
wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a
computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless
charger's surface, including metal pads, magnetic cards, door keys, coins,
NFC cards, or other metal objects, as they could potentially demagnetize the
wireless charger, affect the charging speed, or cause overheating.
• Wireless charging products make charging more convenient than wired
chargers, but confined by current wireless technology, their charging speed
is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power.
It is recommended that you charge your device in environments with
temperatures below 40°C / 104°F.
6
C
Display 3
B
Display 2
A
Display 1
5 Gbps
100W
60W ~ 85W
°C °C
-10 - 40
10.9dBμA/m(@10m)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator & your body.
The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
Declaration of Conformity
Hereby, Anker Technology Co., Limited declares that the product type
A8391 is in compliance with Directives 2014/53/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at
the following internet address: https:/ /www.anker.com
This device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. All
essential radio test suites have been carried out.
The device complies with RF specifications when the
device is used at 20 cm from your body.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type
A8391 is in compliance with the following Directives: The Restriction
of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 & Radio Equipment Regulations 2017.
The full text of the GB declaration of conformity is available at
the following internet address: https:/ /www.anker.com
This device in compliance with the essential requirements and other relevant
provisions of UKCA. All essential radio test suites have been carried out.
The device complies with RF specifications when the
device is used at 20 cm from your body.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza,
610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (for UK matters only):
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings
Road, Tyseley, Birmingham, B11 2AA, United Kingdom
The following importer is the responsible party (for EU matters only):
Anker Innovations Deutschland GmbH
Strasse 3, 80807 Munich, Germany
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
| Georg-Muche-
7