Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the device.
f)
The oil level should be checked regularly and the oil should be topped up if
necessary. Moving parts should be lubricated.
g)
Store the device with the saddle lowered.
TROUBLESHOOTING
Problem
The vehicle is not
lifted or it is lifted
only up to a certain
point.
The vehicle is not
lowered.
Possible cause
The release valve is not
properly closed.
The load exceeds the
maximum working load.
Air in the device.
Low oil level in the tank.
Oil tank is overfilled.
Parts are not lubricated.
Action
Tighten the valve.
Consult technical data. If the
load is too heavy, do not try
to lift the vehicle by force.
Vent the device.
Top up oil.
Drain some oil until the oil
level is within limits.
Lubricate parts.
Publicidad
