Kingfisher FS45DISHUK Manual De Instrucciones página 119

Bottom arm
1. Remove bottom rack.
2. Hold the arm centrally and pull vertically upwards.
3. Clean the jets with a small brush and running water.
4. Replace by pushing the arm down until it clicks into place.
Top arm
1. This can be removed with the top rack still in place.
2. To remove the whole spray mechanism, slide the top rack
forwards and unclip the front and back from the underside
of the top rack.
3. Unscrew the locking nut clockwise to remove the spray
arm from the feeder pipe.
4. Alternatively, to leave the feeder pipe attached to the rack
and just remove the spray arm, unscrew the locking nut as
in step 3.
5. Clean the jets with a small brush and running water.
6. Replace the spray arm by tightening the locking nut and
clicking the feeder arm into place on the rack.
7. Ensure that the feeder pipe engages with the water supply
at the back of the machine when the top rack is pushed
into the machine.
Cleaning the Dishwasher
Regularly wipe the door seals with a well wrung damp cloth to remove traces of food and other debris.
Please ensure that water does not enter into the lock or electrical components mounted in the door.
WARNING: DO NOT USE ABRASIVE CLEANERS OR SCOURING PADS TO
CLEAN THE DISHWASHER BECAUSE THEY WILL SCRATCH THE FINISH.
Caring for the dishwasher
After every wash
Leave the door slightly ajar for a short time to allow moisture and odours to disperse.
Cleaning the appliance
Remove the plug before cleaning the appliance.
Occasionally use propriety dishwasher cleaning and descaling products to maintain the internal cleanliness
of the appliance.
Customer helpline (toll free):
UK 0800 324 7818 uk@kingfisherservice.com
Eire 1-800 932 230 eire@kingfisherservice.com
5059340445717_MNL_IN_V06.indb 118 5059340445717_MNL_IN_V06.indb 118
118
26/5/2022 3:25 PM 26/5/2022 3:25 PM