Kingfisher FS45DISHUK Manual De Instrucciones página 43

01
05. x1
EN
Connect one end of the inlet supply hose to a threaded 3/4" BSP isolating tap connector and ensure
that it is fully tightened. Connect the other end to the inlet connector at the base of the back of the
appliance.
IMPORTANT: This appliance requires adequate backflow protection to ensure waste water from the
appliance cannot enter the potable water supply of your property. During installation, you must ensure
that there is adequate backflow protection to ensure local water regulations are met in the country
where the appliance is used. This includes the use of additional components such as double-check
valves and hose sets that must comply with EN 1717 or EN 61770.
5059340445717_MNL_IN_V06.indb 42 5059340445717_MNL_IN_V06.indb 42
5
42
26/5/2022 3:25 PM 26/5/2022 3:25 PM