HUANUO HNCM8 Instrucciones De Instalación página 4

Step 2
Install Arm to the Pole
Install Swivel Arm (c) to the Pole (a).
Fasten the bolt with supplied Allen Key (n).
Attach the Wire Clip (m1,m2) to the Pole
(a) and Swivel Arm (c).
Step 3
Attach the VESA Plate to the Monitor
For Monitor with Flat Back
Step 4
Slide the Monitor onto the Head of Swivel Arm
Slide the monitor onto the head of
Swivel Arm (c) as shown in the above
diagram.
c
p
For Monitor with Curved or Recessed Back
Install the security Nut (f). Make sure
the security nut is installed before you
rotate the monitor.
3
n
m2
m1
r
q
f