Publicidad
STEP 5
1. Attach 3 hooks (E) to back board (4) by inserting 6 screws (D) through holes on hooks (E),
then tighten to back board (4).
2. Insert 2 wood dowels (A) into dowel holes on left side panel (5) and attach left side panel
(5) to back board (4) by inserting wood dowels (A) into dowel holes on back board (4).
3. Insert 1 screw (C) through hole on left side panel (5) and tighten to back board (4).
4. Repeat above steps 2 and 3 to assemble right side panel (6).
STEP 6
1. Attach assembled back board (4) to bottom board (3) by inserting 2 screws (C) through
holes on bottom board (3) and tighten to left side panel (5), then insert 2 screws (C)
through holes on bottom board (3) and tighten to right side panel (6).
Publicidad
