Publicidad
STEP 7
1. Press 4 plastic caps (F) into screw holes on both side frames (2).
*Tip: If added pressure is needed to keep plastic caps in place – cover caps with a piece of paper and
tap lightly with hammer to secure cap.
STEP 8
Option #1: Securing to Drywall
1.
Using wall mounting paper template to determine position, screw 2 plastic anchors (H) into
drywall.
2.
Insert 2 screws (G) through holes on back cross bar (7) and into plastic anchors (H) and
tighten.
Option #2: Securing to Drywall and Wood Stud
1. Insert 2 screws (G) through holes on back cross bar (7), then tighten through drywall and
into wood stud.
Publicidad
