Sunjoy L-GZ215PST-4B Instrucciones De Montaje página 6

`
Fig.7: Attach Corner connector 1,2 (H1, H2) to top end of the Pole (A) by using Bolt (AA) and Flat washer (BB).
Fig.8: Insert Big top long beam (R) and Big top short beam (S) into Big top connector 1 (Q1) and Big top connector 2
(Q2).
Fig.9: Insert Big top beam (L), Short side beam (M) and Long side beam (N) into connected big top beam.
Fig.10: Insert Big top beam (L) into Corner connector 1, 2 (H, H2).
Fig.11: Attach Short side beam (M) and Long side beam (N) to Side beam connector (J) by using Bolt (EE), Flat
washer (BB) and Nut (FF).
Fig.12: Fix the Hook (Z) onto Small top connector (T). Insert the Small top beam(U) to Small top connector (T)
Then put on the Small canopy (V).
Fig.13: Put on the Large canopy (W), do not spread. Attach the assembled small top to connected big top beam
frame. Finally spread the Large canopy (W) completely to fix it.