Sunjoy L-GZ215PST-4B Instrucciones De Montaje página 5

Fig.1: Attach Base cover (C) to Pole (A), and use the Bolt (AA) and Flat Washer (BB) to connect the Base (B) and
Pole (A)
Fig.2: Connect the Beam F (D) and Beam G (E)by using the Bolt (CC) and Flat washer (BB).
Fig.3: Attach connected Beam to Pole (A) by using Bolt (CC) and Flat washer (BB), then use the Bolt (CC) and Flat
washer (BB) to fix the Beam and Pole top end tightly.
Fig.4: Attach Mosquito pipe O (P) to Beam by Bolt (AA) and Flat washer (BB).
Fig.5: Attach Side beam connector (J) to Beam by Bolt (CC) and Flat washer (BB).
Fig.6: Attach Corner Connector (K) to Beam by Bolt (DD) and Flat washer (BB).
Hardware Pack 2
AA
BB
EE
FF
M6X15 Bolt
M6 Flat washer
M6X35 Bolt,
M6 Nut
8PCS
16PCS
4PCS
4 PCS