Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
INSTRUCTIONS FOR USE
1. Always make sure mixer is unplugged and setting control is set to OFF(0).
2. Press up on mixer release button.
3. Tilt mixer head up.
4. Place bowl in bowl base and turn clockwise until bowl locks into place.
5. Insert attachment onto output shaft and press upward as far as possible. Turn
the attachment counterclockwise, hooking attachment on shaft.
6. Slide on the splash guard.
7. Plug mixer into wall outlet. Select desired speed.
8. When finished, rotate speed control to Off(0). Unplug from outlet.
9. Slide out the splash guard.
10. Press up on mixer release button. Tilt mixer head up.
11. Remove attachment by pressing attachment upward as far as possible. Turn
the attachment clockwise and pull to remove.
12. Remove the bowl by turning it counterclockwise and pull up to remove.
Page 6
Publicidad
