Descargar Imprimir esta página

Mr. Heater MHBE150FAT Instrucciones De Funcionamiento Y Manual Del Propietario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

NEVER LEAVE THE HEATER UNATTENDED WHILE OPERATING!
NEVER LEAVE THE HEATER UNATTENDED WHILE OPERATING!
NEVER LEAVE THE HEATER UNATTENDED WHILE OPERATING!
PRODUCT DIAGRAM
Power Light
CLEARANCE TO
COMBUSTIBLES
Keep electrical cords, drapery, furniture
and other combustibles at least 3 feet
(.914 M) from the front of the heater
and away from the sides, top, and rear.
Clearance To Combustibles
Front
Top
Sides
Rear
INSTRUCTIONS FOR
USE
1.
Place the product on a firm, level
surface.
2.
Plug the unit directly into a 120 V AC
electrical outlet.
Mr. Heater Electric Heater
Hot Air Outlet
3'
3'
3'
3'
POWER
KNOB
Tip-Over Safety Switch
(bottom of the unit)
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY
INSERT.
3.
Rotate the POWER KNOB clockwise to
select between (fan only), (low heat) or
(high heat). LOW position operates the
heater at 1000 watts conserving energy
and HIGH position operates the heater
at a maximum 1500 watts.
4.
Turn the THERMOSTAT KNOB clockwise
to the highest setting.
5.
When the room reaches a comfortable
temperature, slowly turn the
THERMOSTAT KNOB counter-clockwise
until the heating element clicks OFF
(the Power Light will not be shut OFF).
6.
This is the point at which the
Thermostat setting equals the room
temperature. At this setting, the
Thermostat will automatically turn the
heater ON and OFF to maintain the
selected temperature.
5
Operating Instructions and Owner's Manual
THERMOSTAT KNOB
Temperature Control

Publicidad

loading