MANUAL DE INSTRUCCIONES
CODIGO 80170 REV D
07/2020
Pag. 23
12. Install the hinge bracket with the fitted hinge components in the lower
door mounting.
Note
The tabs on the bearing ring must fit into the recesses of the door mounting
during installation.
If necessary, gently rotate the upper ring.
13. Screw hinge bracket into place.
J
.P. SELECTA s.a.u.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: selecta@jpselecta.es - http://www.jpselecta.es