Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Keep plastic bags away from children.
1.
Remove dispenser from packaging.
2.
Unpack drip tray and insert into dispenser.
3.
Properly dispose all of packaging.
INSTALLATION
1.
Place dispenser upright.
2.
Locate dispenser on a hard and level surface in a cool shaded location near a
grounded wall outlet.
Notice: Do NOT plug in power cord yet.
3.
Position dispenser so the back is at least 4 inches from wall and there are at least 4
inches of clearance on both sides.
4.
Level dispenser by adjusting feet. Turn clockwise to raise height and
counterclockwise to lower.
OPERATION
This unit is intended for water dispensing only. Do NOT use other liquids. Do NOT
use for other purposes.
This dispenser has been designed to use water bottles with 3 & 5 gallon capacity.
Do NOT use alternative bottles.
All manuals and user guides at all-guides.com
Model # 900142: Page 5
Publicidad
