Publicidad
Idiomas disponibles
Idiomas disponibles
Blinking Cup & Glass
This dispenser is equipped with a feature to inform
you when the heating and cooling functions are
operating.
•
When the hot cup is blinking it indicates the
dispenser is heating water.
•
When the glass is blinking it indicates the
dispenser is cooling water.
•
When both the cup and the glass are not
blinking it indicates the dispenser is at rest.
Dispensing Cold Water
Note: After setup, it will take 1 hour to get water to maximum cold temperature. During
this time the compressor will run continuously. This is normal.
1.
Position bottle, glass, pitcher or cooking pot securely below cold water tap.
–
The blue triangle below the cold water control indicates the location of the cold
water tap.
–
The circular shapes in the drip plate help align the flow of water. This unit
dispenses water at a fast rate. To avoid splashes, hold cup as close to the tap
as possible.
2.
Depress cold water control downward to start flow.
3.
Release cold water control once desired fill level is achieved.
Dispensing Hot Water
This unit dispenses water at temperatures that can cause severe burns. Avoid
direct contact with hot water. Keep children and pets away from unit while
dispensing. Never allow children to dispense hot water without proper and direct
supervision.
Note: After setup, hot water will be available in 15-20 minutes.
1.
Position bottle, glass, pitcher or cooking pot securely below hot water tap.
The red triangle below the hot water control indicates the location of the hot
-
water tap.
The circular shapes in the drip plate help align the flow of water. This unit
-
dispenses water at a fast rate. To avoid splashes, hold cup as close to the tap
as possible.
All manuals and user guides at all-guides.com
Model # 900142: Page 8
Publicidad
