Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Before reading, unfold
the page containing the
illustrations and familiarise
yourself with all functions
of the device.
INTRODUCTION
Congratulations on the purchase
of your new device. With it, you
have chosen a high quality product.
During production, this equipment
has been checked for quality
and subjected to a final inspection.
The functionality of your equipment
is therefore guaranteed.
The operating instructions
constitute part of this product.
They contain important information
on safety, use and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions.
Use the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed
on, hand over all documents to the
third party.
INTENDED PURPOSE
The bench drill is designed
for drilling in metal, wood, plastic
and tiles. Straight shank drills with
a drilling diameter from 3 mm to 13
mm can be used.
The device is intended to be used
by do-ityourselfers. It was not
designed for heavy commercial use.
The tool is not to be used
by persons. under the age of 16.
Children over the age of 16 may use
the tool except under supervision.
The manufacturer is not liable for
damage caused by an improper use
or incorrect operation of this device.
GENERAL DESCRIPTION
Extent of the delivery.
Carefully unpack the appliance
and check that it is complete.
Dispose of the packaging material
correctly.
- Baseplate
- Drilling bench
- Column tube
- Motor unit
- 3 drill lifting arms
- Safety device
- Depth stop
- Drill chuck
- Drill chuck key
- Allen key
- Mounting material
- Original instructions
DESCRIPTION
OF FUNCTIONS
Please refer to the descriptions
below for information about the
operating devices.
OVERVIEW
A
1 - Off switch
2 - On switch
3 - Depth stop with scale
4 - Drill chuck
5 - Emergency stop switch
6 - Drill spindle
7 - Safety device
8 - Gear cover
9 - Hand spindle guide with 3 drill
lifting arms
10 - Holder for drill chuck key
11 - Locking screw for gear cover
12 - Clamping screws
13 - Retaining screws
14 - Motor unit
15 - Column tube
16 - 3 Assembly screws
17 - Baseplate
18 - Angle scaling
19 - Retaining screw for drilling
bench Inclination (not visible)
20 - Drilling bench
21 - Vice (optional)
22 - Chuck jaws
23 - Vice mounting material
24 - Locking handle
B
25 - Motor side drive pulley
26 - V-belt
27 - Interlock switch
28 - Spindle-side drive pulley
C
29 - Drill chuck key
30 - Allen key
25
Publicidad
