Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PROBLEM
DEVICE DOESN'T START.
STRONG VIBRATIONS.
LOUD SQUEAKING NOISE.
POSSIBLE
CAUSE
- Emergency stop switch (5)
has been triggered.
- No mains voltage.
Main circuit breaker is tripped.
- On/off switch (2/1) is broken.
- Motor faulty.
- Motor unit (14) not fixed
in place.
- Bit not centrally clamped
- V-belt tension is too high.
- Damaged V-belt (26).
- Damaged pulley.
ERROR
CORRECTION
- Reactivate the emergency
stop switch (5) by turning it.
Press the on switch (2) to
restart the device.
- Check the socket, mains
supply cable, cord, mains plug;
if necessary, have them repaired
by a qualified electrician.
Check the main fuse.
- Repair by Customer Care.
- Repair by Customer Care.
- Check V-belt tension
and tighten the locking screw
(13).
- Check the bit in the drill chuck
(4).
- Check V-belt tension.
- Check V-belt (26).
- Check pulleys.
33
Publicidad
