Publicidad
Idiomas disponibles
Idiomas disponibles
attempt to clean by inserting pointed objects through open- ings.
c.
Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and household cleaners containing ammonia. Do not
use any of these to clean the saw.
d.
Have an authorized service center examine and/or replace the worn carbon brushes in the
event of excessive parking.
e.
Blades become dull even when cutting regular lumber, a sure sign of a dull blade is the need
to force the saw forward instead of guiding it while making a cut. Take the blade to a service
center for sharpening.
f.
Keep the machine clean all the time.
g.
If you discover any damage, consult the exploded drawing and parts list to de- termine exactly
which replacement part you need to order from our customer service department.
h.
Clean the housing only with a damp cloth. Do not use any solvents! Dry thor- oughly
afterwards.
i.
If the supply cord of this power tool is damaged, it must be replaced by a similar cord available
through the service organization or a qualified authoritative techni- cian.
CAUTION:Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent
on a damp cloth is recommended. Water must never come into contact with the tool.
10.
Transport
Turn the motor off and disconnect the mains plug. While transporting, be careful not to drop, or
shock the machine. For transport, the machine has to be fixed against slipping and tipping over.
Do not place objects on the machine.
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your TECCPO product needs replacement, or if it is of no
further use to you, do not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical products from the
household, at municipal waste sites or by the retailer when you purchase a new product.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation.
Protecting the environment
- 08 -
Publicidad
