StetSom DB500.1 Manual De Usuario página 21

• Make a good grounding of the amplifier. To do this, remove the paint from the vehicle
chassis at the desired point. Screw the wire using a ground terminal. To protect from
oxidation, isolate with paint.
• Do not loop the ground. Avoid using multiple grounds. If possible, use a star connection,
in which all the grounds run from a single point.
Any updates made in this manual will be available for costormers to consult without any
charge on the brand's site.
It is recommended that the updated manual be consulted whenever needed.
Images contained in this manual are merely illustrative and may differ from the actual product.
21