Corsair AF RGB ELITE Manual De Instrucciones página 3

FAN INSTALLATION
4 CONNECT AF RGB ELITE
Connect the 4-pin RGB connector into the
Lighting Node CORE in sequential order from
port #1 to port #6.
iCUE SETUP
6 INSTALL iCUE
Click the image to download CORSAIR's latest
iCUE software.
COMPATIBILITY
LIGHTING NODE CORE
Up to 6x RGB fans, RGB
Lighting Control only
LIGHTING NODE PRO
Up to 12x RGB fans for
RGB Lighting Control
Up to 12x RGB fans, RGB
(requires RGB LED hub,
Lighting Control only
sold separately)
(requires RGB LED hub,
sold separately)
Up to 6x fans for fan
speed control
ENGLISH
5 CONNECT LIGHTING NODE CORE
Plug the 9-pin USB cable from the Lighting
Node CORE into an available internal USB
2.0 header on your motherboard or USB hub.
Connect the SATA power connector to an
available SATA connector from your power
supply.
7 CONFIGURE iCUE
Once iCUE is installed, select the "8-LED
Fan Series" in the Lighting Setup page under
Lighting Node CORE
8 ADDITIONAL SETUP
Please visit our
iCUE setup and configuration.
COMMANDER PRO COMMANDER CORE
Up to 6x RGB fans for
RGB Lighting and fan
speed control
2
for additional
CORSAIR LAB
COMMANDER CORE XT
Up to 12x RGB fans for
RGB Lighting Control
(requires RGB LED hub,
sold separately)
Up to 6x fans for fan
speed control