Descargar Imprimir esta página

GreenWorks MTG305 Manual Del Operador página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Sanding
For maximum performance, operate the machine at a high
speed.
1. Attach a sanding disc, or cut sandpaper to fit the backing
pad.
2. Always begin with a coarse grit, using successively finer
grits to get the desired finish.
3. Start the machine and let it to reach full speed.
4. Use light pressure and long, sweeping, side to side
strokes, advancing forward to produce the desired finish.
WARNING
To reduce the risk of injury, keep hands away from the
blade and all moving parts. Always wear safety goggles or
glasses with side shields.
10
MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
10.1
CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
Clear the unwanted material out of the air vent with a
vacuum cleaner.
Do not spray the air vent or put the air vent in solvents.
Clean the housing and the plastic components with a
moist and soft cloth.
11
TECHNICAL DATA
Voltage
No Load Speed
Oscillation angle
Weight with battery
Battery model
English
24 V
-1
5000 - 18000 min
3.2°
2.11 lbs (0.96 kg)
LB24A020/BAG708 and
other BAG series
Charger model
12
LIMITED WARRANTY
LIMITED WARRANTY
GARANTIE LIMITÉE
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion, will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been purchased or rented for industrial/commercial use, and
that have been maintained in accordance with the instructions
in the owners' manual supplied with the product when new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline
at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
9
2978602/2903102 and other
CAG series
3
YEAR
ANS
AÑOS
GARANTÍA
LIMITADA
Canadian address:
Greenworks Tools Canada, Inc.
P.O. Box 93095, Newmarket,
Ontario
L3Y 8K3
EN

Publicidad

loading