Publicidad
Idiomas disponibles
Idiomas disponibles
7
PROPOSITION 65
WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
•
Lead from lead-based paints;
•
Crystalline silica from bricks and cement and other
masonry products;
•
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
8
INSTALLATION
8.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
•
If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
8.2
INSTALL THE ACCESSORY
1. Pull the quick-release lever (1) and turn it
counterclockwise to loose the clamping plate (4).
English
2. Install the accessory and place it firmly onto the locating
pins (6).
Make sure that the clamping plate is placed well into the
holder of the machine, otherwise you cannot spin the quick
release lever.
3. Turn the quick-release lever clockwise to fasten the
clamping plate and accessory.
4. Put the quick release lever down.
7
1
6
4
NOTE
EN
Publicidad
