Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8.3
INSTALL THE BATTERY PACK
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
•
Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
9
OPERATION
Always wear eye protection.
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
9.1
START THE MACHINE
WARNING
WARNING
WARNING
English
1. Push the on/off button in the on position.
9.2
STOP THE MACHINE
1. Push the on/off button in the off position.
9.3
ADJUST THE VARIABLE SPEED
The machine can be set at 6-speed adjustment positions.The
"1" position indicates the lowest and the "6" position
indicates the highest speed. You can adjust different speed by
turning the speed dial (5) from "1" to "6" position.
9.4
OPERATE THE MACHINE
Always remove battery pack before changing or removing
accessories. Only use accessories recommended for this
machine. Others can be dangerous.
Sawing/Cutting
For maximum performance, operate the machine at a high
speed.
1. Install a sawing/cutting blade at an angle easy to use.
Correctly clamp the workpiece.
2. Start the machine and let it to reach full speed.
3. Use moderate pressure without burning or scorching the
workpiece.
Scraping
For maximum performance, operate the machine at a low
speed.
1. Install a scraping blade at an angle easy to use.
2. Start the machine and let it to reach full speed.
3. Use light pressure and a low angle without gouging and
damaging the workpiece.
8
5
WARNING
Publicidad
