Publicidad
Idiomas disponibles
Idiomas disponibles
TO REMOVE HAIR FROM EYEBROWS (Diagram 8. Attachement 8)
• Attach the nose trimmer attachment.
• Gently guide cutting unit to stray, unwanted hairs along the eyebrow line or protruding from
the eyebrow itself.
• To remove the hairs completely lower onto the skin and move over desired area.
• Use slow and well-controlled movements.
ATTACHING AND REMOVING THE TRIMMER COMB ATTACHMENT
NOTE: Always ensure the personal groomer is switched off before changing any attach-
ments.
• To remove, hold the personal groomer with one hand and turn the trimmer head anti-
clockwise with the other.
• To attach, hold the personal groomer with one hand and turn the trimmer head clockwise
with the other.
TIPS FOR BEST RESULTS
• Remove trimmer comb attachment if you are: defining hairline edges such as sideburns.
Trimming the nape of your neck, trimming your beard line on front of neck .
CARE FOR YOUR PERSONAL GROOMER
Care for your product to ensure a long lasting performance. We recommend that you clean
your groomer after each use.
The easiest and the most hygienic way to clean the groomer is by rinsing the product head
after use with warm water. Always keep the trimmer in the "off" position when the shaver is
not in use.
AFTER EACH USE
• Rinse the accumulated hair from the cutters and shake off excess water. Alternatively, use
a brush.
• Gently tap on a flat surface to remove hair particles, and brush the remaining hairs away.
• Place one or two drops of cutter oil or sewing machine oil on the blades. Turn the clipper
on to distribute the oil evenly, wipe off any excess oil.
• Wipe the main unit with a damp cloth and dry immediately.
Note: ensure that the groomer is turned off when applying the oil or rinsing under the tap.
CLEANING CAUSIONS
• The guide comb attachment and trimmer blade may be removed from the product for
cleaning.
• Cleaning should only be done with a soft brush, such as the brush supplied with the pro-
duct. Attachement #9.
• Use the light-grade oil supplied or sewing machine oil on the blades. Attachement #10.
• Do not use harsh or corrosive cleaners on the units or their blades.
12
ENGLISH
Publicidad
